Magnetic loop hanger

Hanger made of textile ribbon and sewn-in magnets

Author: Dominik Funk, Fürth, Germany

Online since: 16/10/2012, Number of visits: 332042

Textile ribbon hanger

During my last camping trip I mostly missed places to hang up stuff under the motorhome awning. My idea of using magnetic hooks didn't work out due to a lack of even metal surfaces. The next best solution: Suspending objects with magnets sewn into textile ribbon.

Below, I would like to explain how to make them. First, you will need the following materials:

2 block magnets, e.g. Q-30-10-05-N
textile ribbon, at least 4 cm wide
(available at the hardware store as ‘furniture strap’)
sewing thread and needle
scissors
lighter

Note from the supermagnete team: The textile ribbon should not be too thick, as this would significantly reduce the adhesive force of the magnets.

Assembly

Now cut the textile ribbon to the desired length (20 -30 cm). You can singe the ends to prevent fraying. Fold the ribbon lengthwise and sew it together to form a long tube-shaped sleeve.

Then, 5 cm from the end of the ribbon, sew a cross-seam at each end. This will later help to keep the magnets in place. Next, insert the two magnets into the ends of your tube ...

... and secure them with another cross-seam at each end of the ribbon. The magnets are now hemmed in between two seams in such a way that they can no longer shift around.

Please note: Once you have inserted the second magnet into the tube, please check the correct orientation of the magnets: Make sure that the magnets are exactly on top of each other and that they attract each other. If so, you can go ahead close the second opening with a cross-seam as well.

Once the second tube opening has been sealed, the loop hanger is ready. If you use the material as described here, the magnetic ribbon should easily hold a weight of 3 kg.

My tip:
Use, for example, a metal bottle cap or preserves jar lid as a ferromagnetic counterpart for your magnetic loop hanger. Hold the lid to the outside of the tent wall and move the magnets of the ribbon towards it from the inside of the tent. The magnets will adhere to the bottle cap or metal lid. Now your glasses, keys or other everyday items are always within reach!

Note from the supermagnete team:
You can find detailed information regarding this idea in the customer project Magnetic hanger with metal lid for tents.

Articles used

Q-30-10-05-N

Block magnet 30 x 10 x 5 mm, holds approx. 6,5 kg, neodymium, N42, nickel-plated

	1 pc.	2,73 EUR ea.*
from	3 pcs.	2,39 EUR ea.*
from	10 pcs.	2,09 EUR ea.*
from	20 pcs.	1,94 EUR ea.*
from	40 pcs.	1,81 EUR ea.*
Ask for a rebate from 350 pcs.

Available: 25 884 pcs.

Q-10-05-03-N

Block magnet 10 x 5 x 3 mm, holds approx. 1,5 kg, neodymium, N45, nickel-plated

	10 pcs.	0,57 EUR ea.*
from	40 pcs.	0,47 EUR ea.*
from	80 pcs.	0,43 EUR ea.*
from	160 pcs.	0,39 EUR ea.*
Ask for a rebate from 750 pcs.

Available: 4 660 pcs.

0 people like this customer project -Projects are bookmarked in your customer account

This might also interest you

Necklace clasp

Wooden panel as dining table

Magnet fishing in XL

Mini greenhouse

keywords

Hanging up ( 85 )
Sewing ( 17 )
Textile ( 54 )
Magnet closure ( 24 )
Outside ( 77 )
Easy ( 200 )
Useful ( 234 )
Camper ( 25 )

The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.